Sony NW-ZX300/A custom firmware



On this page you can find custom firmware for the Sony NW-ZX300Series Walkman player:




You can find previous StockRevert packages for NW-ZX300Series custom firmware, here.


52 comments:

  1. First of all many thanks for the head work you’re doing to benefit many users like me really appreciated.
    On my Japanese language ZX300 I have installed as per instructions and all seems fine except the language is still the same I.e. Japanese. Is it normal? And lastly is there any way to change the language to English please?
    Many thanks

    ReplyDelete
    Replies
    1. Hey, if you can't change the language from Japanese, it means your player is using the J region. You can change the region with the tool available here: https://www.rockbox.org/wiki/SonyNWDestTool

      All the necessary info about the tool and how to use it can be found there. After changing the region, just restart the player (no need to reset the settings), and then you should be able to change the language. You can switch back to J region afterwards, and the English language will remain.

      Delete
  2. Thank you ever so much. As a token of appreciation a very little PayPal sent. Kind regards, CoolPixAlways

    ReplyDelete
  3. I'm using zx300. It sounds great. Thank you.

    ReplyDelete
  4. Thank you very much! It sounds the vocal are more clear and warmer and the bass has increased.I have just donated as a little token of my appreciation through PayPal.

    ReplyDelete
  5. When I first bought the zx300, I was quite disappointed compared to my fantasies of a well-rated music player back in 2017, the sound of the zx300 version 1.02 was not really interesting to me, so the frequency of use My usage tapered off until completely. put my zx in the cupboard. But I was really surprised, 3 years later, on a typical day, I downloaded Mr.Walkman's DMP-300 firmware and miraculously happened, my ZX300 came alive and different. completely. It feels like every hardware placed by Sony on the zx300 has been exploited by Mr.Walkman very effectively. This makes me want to thank Mr.Walkman, who "reborn" my ZX with his dedication.

    From Vietnam with love <3.

    ReplyDelete
  6. I sent a little from my paypal account. Thank you for your work!The native DSD function for 3.5mm is really sweet!
    Love from China

    ReplyDelete
  7. Can the new firmware support atrac file in Japan model of ZX300?

    ReplyDelete
    Replies
    1. It should already support ATRAC files while the player is on the J region.

      Delete
  8. link not working :(

    ReplyDelete
    Replies
    1. Yeah, someone reported it to Google or something. Will fix it soon.

      Delete
  9. Awesome work! Great job Mr. Walkman!
    I have just donated as a little token of my appreciation through PayPal :)
    Just one question: it is correct that the name displayed in the device information remains "ZX300" (in previous versions it was changed to "Z1"). The installation procedure seems to have been successful, but I would like to be sure ...

    ReplyDelete
    Replies
    1. Thanks, I really appreciate it, and I hope that you like the sound!

      Yep, the displayed name is now ZX300. As long as you can see "DMP-300 FE" in the "Unit information" menu, and if you also applied the DMP-300_FE_Ext_Tuning, all should be fine.

      Delete
  10. Any surprise or noticeable change or improve on our zx300 update, I love your work a lot

    ReplyDelete
  11. All my praise, thank you very much for sharing all your work with so much patience and generosity. I'm amazed of how my CA Vega sound with the zx300 with the FEv2 version. Amazing rendition of sound and yes, i'll repeat that topic that says that it seems that a veil disappeared. I didn't notice it in a so dramatic way with the "classic" FE: it seems that the improvement in the mids and highs area, a bit more detailed and smoother at the same time, has the best synergy with Vega's signature.
    Again, thanks.

    ReplyDelete
  12. I just wanted to thank you, MrWalkman, for making the DMP-300 FEv2 available so quickly. The ZX300 will now be like its big brother.
    I had no difficulty installing the new software and tuning. The switch between "classic" mode and "plus" mode with the "hold" button works perfectly.
    Thanks again.

    ReplyDelete
  13. Hi! Z1 contains an amplifier and a DAC, and 300 is built on an S-master amplifier. Does your firmware remove the signature S-master sound? Can you say that changes in the sound of your firmware improve the natural sound of the player? Or are they just beautifying the sound, making it more "interesting" but less truthful?

    ReplyDelete
    Replies
    1. Hey, the changes to the sound are towards naturalness. This should be obvious after giving it a good listen. Voices sound more like voices, and other sounds are simply more realistic.

      Delete
    2. Thanks for the answer! But I still have a question :-) I also use the player as a signal source, connecting it to an external DAC using an adapter Sony WMC-NWH 10. After your firmware, will the digital signal be output unchanged?

      Delete
    3. When using that adapter, the digital signal output will continue to be unchanged.

      Delete
  14. Hello, I have a problem that when installing the second file the zx300 no longer recognizes me. Any solution?

    ReplyDelete
    Replies
    1. Hey, check out this post: https://www.mrwalkman.ml/2021/02/small-issue-with-installing-project-z.html

      Delete
    2. Gracias si funcion├│ :)

      Delete
  15. Why do I often appear the prompt of please connect the USB device? It is clear that I have connected the USB device. This has happened from time to time in the previous version. But now I want to restore other versions, which are not allowed. Now I can only transfer songs, and I can't update / restore any firmware

    ReplyDelete
    Replies
    1. Hey :)

      https://www.mrwalkman.ml/2021/02/small-issue-with-installing-project-z.html

      Delete
    2. Ok, i will try it。By the way I want to say you have lot of fans in China“Walkman Club” Everyone enjoy and share your work,Good Job !

      Delete
  16. Installed and very pleased with the sound. Thanks and sent my donation for your efforts

    ReplyDelete
    Replies
    1. I really appreciate the support, thanks!

      Delete
  17. Hi, Thank you for the work. just question, after I installed the custom firmware, when I connect to pc, music center tell me that my NNW-WM1A, NW-WM1Z( zx300) can be update, and It failed during the reboot of the player. Is that normal? Or I shouldn't update the player as all? Thankyou again.

    ReplyDelete
    Replies
    1. Hey, your player is still a ZX300, and I took steps to ensure that someone doesn't install the 1A/Z firmware by mistake, as things can go wrong (touchscreen not working, for example).

      Delete
  18. I'd love to be able to make the Plus mode permanent instead of having to make sure I toggled the HOLD switch. Would that be possible?

    ReplyDelete
    Replies
    1. Hey, I have an idea about making this an option. Stay tuned.

      Delete
  19. Would any of these wok on my ZX100?

    ReplyDelete
  20. I have the zx300-A++ mrwalkman firmware installed, but I don't have the stock revert file anymore (old computer died). How do I revert the firmware? Thanks!

    ReplyDelete
  21. Where are you mr.walkman? We are waiting for new firmware. Hope you are doing well.

    ReplyDelete
  22. hello,

    is it possible with this firmware to revert a Japanese only model to a English one=?

    Thanks

    ReplyDelete
  23. Really love the sound features! Thank you!!!
    BTW, any chance to provide a option for people like me who loves the Plus mode to boot into Plus mode by default?

    ReplyDelete
  24. Excellent work. Thank you! Out of curiosity, and this may have been answer based on adding the percentage to the battery life requiring access to the source code, but does the firmware allow for positioning of the scrollbar in menus (songs, artists, playlist, etc.)? For instance, positioning scrollbar on left or right of screen? The person using our device is left-handed, making it difficult to view the screen while scrolling with one hand (left hand thumb). Thanks in advance!

    ReplyDelete
  25. First of all,thank you for your marvelous firmware.For I'm Chinese,I can't express my appreciate to you well.
    Secondly,I want to come up with a detail.After installing the Midnight v2.Project Z, I returned to the official version and changed the rigeon from China to Japan,I find the certificition (only the version of Japan has it)was not the zx300series at all. It changed to the NWA1,for the bottom of the certificition has a picture of NWA1,what I haven't seen before.I hope you to have a look at this case.
    Finally,thank you for your firmware again, the device works well.
    from a Chinese graduate student

    ReplyDelete
    Replies
    1. Hey, will take a look, and it should be fixed in a next release.

      Delete
    2. This comment has been removed by the author.

      Delete
    3. Hello, have you found a solution to this problem?

      Delete
    4. Hey, I know the solution, but I'd rather have it in a future update. Unfortunately I don't have too much available time to work on multiple things at once.

      This thing is not doing anything to make the player unusable, so I don't really see it as a priority.

      Delete
  26. Hi, Thank you for the work.
    In Midnight v2 for ZX300/A (September 6th), I got some issues when installing the firmware. Both external_tuning in the file cannot be installed. It always shows "Connect the player to the computer with a USB cable". But, I have already plugged in the USB.
    Also, after I installed the "1. Midnight_v2_(for_ZX300)_installer", it seems that some part of the contents (bottom navigation) is missing.
    Can you help me to figure it out? I can't wait to try the Midnight v2. Thank you again.

    ReplyDelete
    Replies
    1. Mass Storage mode needs to be on for the installation to work.

      For other issues please send me an email with a photo of what doesn't look right.

      Delete
  27. YES,ZX300A, got the same "Connect the player to the computer with a USB cable" error here. Plz check this version if it can recognize ZX300/A correctly. Great thx for your mod.

    ReplyDelete
    Replies
    1. It can recognize both ZX300 and ZX300A.

      As I mentioned above, confirm what firmware yoi have installed in the "Unit Information" menu, and make sure you enable the Mass Storage mode, otherwise installation won't work.

      Delete
    2. My BAD. Last firmware installed was Project-Z.So I used the wrong reverting tool.After using the correct reverting tool,everything works perfectly. Grateful Heartly!

      Delete